Alloy Grade 9 / Ti 3Al2.5V / 3.7194

Titanium Alloy ( 3AL/2.5V) Grade 9 is sometimes referred to as half Ti 6/4. It offers higher strengths than the commercially pure alloys , and is easier to form than the Ti 6AL/4V “work horse alloy”. Its main available form is seamless tubing used in the aircraft and leisure industries such as bicycle frames and golf clubs etc . Typically this alloy is supplied in two Conditions Annealed and CWSR ( Cold Worked & Stress Relieved)

Applications

Used in aircraft applications where strength is required but weight is a critical factor. Ti-3Al-2.5V is used in tubular form since it has proven to be much more malleable than Ti-6-4 and has useful properties for applications in hydraulic systems. Ti-3Al-2.5V titanium tubing can be cold worked by standard tube manufacturing processes or supplied in the annealed condition. Other applications include, bicycle and wheel chairs frames.

Material Data Sheet Ti Gr 9

Chemical Composition Ti Gr 9

Special Properties Ti Gr 9

Melting Range < 1700 Deg C
Density 4.48 g/cm³
Elastic Modulus 100 GPa
Shear Modulus 44 GPa
Excellent Resistance to pitting and crevice / erosion corrosion
High Mechanical strengths , superior to the C. P Titanium Grades

Filler metal (for welding with titanium Gr 7)

As filler material for titanium grade 7 bare wire of the same titanium group should be used

Specifications Ti Gr 9

The Hempel stock material fulfills generally following specifications:
ASTM B338 Fully Annealed
ASTM B338 CWSR
AMS 4943/4/5

The material comes with a 3.1 certification. 3.2 certification are available with surcharge.

Mechanical Properties Ti Gr 9

Delivery program

Tubes / Fittings ISO6708
<DN65