loading ...

Alloy 601 / 2.4851

Alloy 601H is a nickel-chromium-iron alloy with additions of aluminium and titanium. It is characterized by:

- outstanding resistance to oxidation at high temperatures

- good resistance to carburizing conditions

- good resistance to stress-corrosion cracking

- good resistance at oxidating, sulfur-containing atmospheres good mechanical properties at both room and elevated temperatures due to solid solution hardening

Alloy 601 / 2.4851 metal powder for 3d metal printing

We are pleased to offer you powder for 3D printing made of 2.4851 (Alloy 601). Send us your inquiry.

Material Data Sheet

Material Designation 2.4851
Alloy Alloy 601H
EN Material Symbol NiCr23Fe
UNS N 06601
Trademark Nicrofer® 6023-H
ISO NiCr23Fe15Al

Main fields of application of alloy 601H

In the sector of elevated temperatures, Alloy601H has a wide variety of applications. Apart from applications in furnace construction, chemical processing, pollution control and power generation, there is a variety of further purposes, i.e.:

- refractory anchors, strand-annealing and radiant heater tubes, high-velocity gas burners, wire mesh belts in industrial furnaces

- trays, baskets and fixtures for heat treatment plant , i.e. for carbonization or carbonitiding

- combustion chambers in solid waste incinerators

- components in exhaust gas systems

- tube supports and ash-handling components

Chemical composition of alloy 601H

C Si Mn P S Cr
≤ % ≤ % ≤ % ≤ % ≤ % %
0.03-0.1 0.5 1.0 0.02 0.015 21.0-25.0
Al Ni Ti Cu Fe B Co
% % % ≤ % ≤ % ≤ % A max. of 1,5% Co, which is valued as Nickel, is allowed.
1.0-1.7 58.0-63.0 0.5 0.5 18.0 0.006 No value for Co specified in ASTM.

Characteristics of alloy 601H

Temperature Range High-Temperature Range
Density 8,1 g/cm³
Melting Rage 1320°C – 1370°C
Elongation of Alloy 601H plate at 20°C ≥ 30 %

Filler metal (for welding with alloy 601H)

For the gas-shielded welding processes, filler metal with an overalloyed composition compared to the base metal is recommended:

Welding rods and bare electrodes 2.4649:


DIN EN ISO 18274: S Ni 6602 (NiCr25Fe10AlY)
UNS N06025
AWS A5.14 ERNiCrFe-12

Covered electrodes 2.4633:


DIN EN ISO 14172: E Ni 6704 (NiCr25Fe10Al3YC)
UNS W86025
AWS A5.11: ENiCrFe-12


2.4628

Delivery program

Sheets / Plates mm

2 - 20

With short delivery time:

plates or sheets, tubes, flanges, forged or die-cut rings and round blanks, elbows, T-fittings, reductions, screws, nuts or washers according to your request. according to your individual wishes, we are able to cut our material with our plasma- or water jet cutter. Our material is stocked in superformats of 2000x6000mm. Cut to size on request.

Material Outlet by Hempel

ECONOXX.com offers buyers a new and uncomplicated procurement channel, which also includes small quantities and materials in special alloys at favourable conditions.

Product Count

Sheets & plates (42)

Sheets & plates Sheets & plates 2.4851 - 601H
42

Contact us

Wido Glombitza
Wido Glombitza
Business Unit Manager Medical, Aerospace, Industry

Request an offer

Weight Calculator

Please enter the desired parameters

mm
mm
mm
mm
mm
Piece

Results

DensityN/A
WeightN/A