Titanium Grade 2 is a pure alpha titanium and is the most widely used titanium alloy in all product forms for industrial service because of moderate strength and excellent corrosion resistance and formability. Compared to the other grades of commercially pure titanium, Grade 2 is slightly weaker than Grade 3, but stronger than Grade 1 and equally resistant to corrosion. Grade 2 offers excellent balance of moderate strength and reasonable ductility. This material is also non-magnetic.
Grade 2 / 3.7035 metal powder for 3d metal printing
We are pleased to offer you powder for 3D printing made of 3.7035 (Grade 2). Send us your inquiry.
|EN Material Symbol||Titan Grade 2|
In chemical processes (can be use in oxidizing media, alkaline media, organic acids and compounds, aqueous salt solutions and hot gases);offshore industries (is fully resistant to corrosion in seawater at temperatures up to 300°C); in aircraft construction where a certain strength level and ease of formability is desired; in heat exchangers, hypochlorite systems, fire water systems, ballast water system, pumps and cryogenic vessels.
|Miniumum values||Typical values|
|Yield Strenght||275 MPa||350-450 MPa|
|Ultimate Strenght||345 MPa||485 MPa|
|Elongation in 50 mm, A5||20 %||28 %|
|Reduction in area||30 %||55 %|
|Modulus of elasticity||103 GPa|
|Charpy V-Noch Impact||40-82 J|
Grade 2 has very good weldability. Being substantially single-phase material, the microstructure of the alpha phase is not affected greatly by thermal treatments or welding temperatures. Therefore, the mechanical properties of a correctly welded joint are equal to, or exceed those of the parent metal and show good ductility
Sheets / Plates mm
1 - 40
1 - 3
Bars / Billets dia. mm
3 - 200
Tubes / Fittings ISO6708
Precision strip mm
0.2 - 0.5
With short delivery time:
plates or sheets, tubes, flanges, forged or die-cut rings and round blanks, elbows, T-fittings, reductions, screws, nuts or washers according to your request. According to your individual wishes, we are able to cut our material with our plasma- or water jet cutter. Our material is stocked in superformats of 2000x6000mm. Cut to size on request.
ECONOXX.com offers buyers a new and uncomplicated procurement channel, which also includes small quantities and materials in special alloys at favourable conditions.
powered by Hempel